Semiduken DKMT110-16-M13 Thyristor Module

• Model: DKMT110-16-M13

• Brand: Semiduken

• Type: Dual Thyristor Module

• Average On-state Current (IT(AV)): 110 A @ Tc = 85°C

• RMS On-state Current (IT(RMS)): 173 A

• Surge Current (ITSM): 2500 A (10 ms half sine)

• I²t for Fusing Coordination: 31.2 kA²s

• Repetitive Peak Off-state Voltage (VDRM): 1600 V

• Repetitive Peak Reverse Voltage (VRRM): 1600 V

• Repetitive Peak Current (IDRM / IRRM): Max. 12 mA

• Threshold Voltage (VTO): Max. 0.8 V

• Peak On-state Voltage (VTM): Max. 1.83 V @ ITM = 330 A

• On-state Slope Resistance (rT): Max. 2.29 mΩ

• Holding Current (IH): 10–150 mA

• Critical dv/dt: Max. 800 V/μs

• Critical di/dt: Max. 100 A/μs

• Gate Trigger Current (IGT): 30–150 mA

• Gate Trigger Voltage (VGT): 0.7–2.5 V

• Non-trigger Gate Voltage (VGD): Min. 0.2 V

• Thermal Resistance Junction to Case (Rth(j-c)): Max. 0.25 °C/W

• Thermal Resistance Case to Heatsink (Rth(c-h)): Max. 0.15 °C/W

• Isolation Voltage: Min. 2500 V AC

• Terminal Torque (M5): Typ. 4 N·m

• Mounting Torque (M6): Typ. 6 N·m

• Storage Temperature: -40°C to +125°C

• Weight: 110 g

• Typical Applications: AC/DC motor drives, rectifiers, DC supply for PWM inverter

• Case Dimensions: 80 × 30 × 30 mm

• Mounting Base: Isolated

• Design: Pressure contact with enhanced power cycling

• Conduction Angle Performance: Refer to Page 3 Graphs (Fig. 3–6)

• Thermal Impedance: See Fig. 2 (Page 3)

• Surge Current vs Cycles: See Fig. 7 (Page 4)

• Gate Trigger Curves: See Fig. 10 (Page 4)

• Baseplate: Ceramic isolated, optimized for heatsink contact

• Connection: M13 Type Terminals